RYOBI MHI V3000 TP

RMGT10 TP (Tandem perfector)

The RMGT 10 TP is a unique tandem perfector press on which the reverse-side printing units are connected to a straight printing press via a special translink unit. After printing the reverse side, the front side is printed without the need to reverse the printed sheets, eliminating various limitations typically associated with perfecting. This also makes it possible to perform perfecting on heavy stock. UV perfecting is also possible by equipping the translink unit with a UV curing unit, providing high-grade printing with no difference in printing quality between the front and reverse sides.

  • Special translink unit smoothly transfers sheets from the reverse-side printing units to the front-side printing units without turning the sheets over
  • Sheet transfer is performed without changing the gripping side, so plate making position is the same for the front and reverse sides
  • Virtually no fan-out, so front and reverse register precision is comparable to that on a straight press
  • Configuration can be freely selected from among 1 to 5 reverse-side printing units and 1 to 5 front-side printing units according the job requirements

Specifications

Model 1020 model 1050 model
Max. printing speed 16,200 S.P.H.
Max. sheet size 740 x 1,020 mm 750 x 1,050 mm
Min. sheet size 360 x 540 mm
Max. printing area 730 x 1,020 mm 740 x 1,050 mm
Paper thickness 0.04 – 0.6 mm
Design and specifications are subject to change without notice.
This data was obtained under RMGT’s standard test conditions. Results will vary according to the operating conditions.

 

Grafisk Kompani på Facebook